Q. The display is different

If the controller display is different from usual, such as “TRIP” or “0.00”.

※Operation methods vary depending on the controller.

How to Switch the KUD Controller Display

1. Switch to function setting mode

   1. Press and hold 『stop』, then press and hold 『Enter』+『manu/auto』 simultaneously for 3 seconds or more. An alarm sound will beep, and “F-Adj” will be displayed on the display, switching to function setting mode.
      

2. Set the display pattern
   

3. Exit function setting mode

   1. Press and hold 『stop』, then press and hold 『Enter』+『manu/auto』 simultaneously for 3 seconds or more. An alarm sound will beep, and the system will switch to normal operating mode.