Q. Displayed as “TEIKITENKEN”

If you cannot remove the “TEIKITENKEN” display.

※Operation method differs depending on the controller.

How to clear the GA controller periodic inspection display

1. How to clear the periodic inspection display

   1. Press and hold 『確定』 while pressing 『STOP』 for 3 seconds or more.
      The 7-segment display on the operation panel will flash and the buzzer will sound to notify you of the inspection time for every 50,000/100,000/200,000 (and every 100,000 thereafter) openings/closings.
      

2. 目安 of periodic inspection implementation (Inspection time based on the number of openings/closings)
   

   1. The LCD display on the controller will flash and the buzzer will sound to notify you of the inspection time for every 50,000/100,000/200,000 (and every 100,000 thereafter) openings/closings.

   2. Monthly inspection
      Once a month, inspect for abnormal noises and the mounting and detection areas of each sensor, and confirm that they are operating normally.

   3. When the cumulative number of openings/closings reaches 500,000, please request a general inspection from the dealer where you purchased the product.

      ※The inspection frequency varies depending on the size of the shutter, the number of years of use, usage conditions, and purpose. Please consult with the dealer where you purchased the product.